CP6100 Configuration and Management Manual

Managing CP6100 Using the Subsystem
Control Facility (SCF)
CP6100 Configuration and Management Manual—426741-003
8-26
Display for the STATUS LINE Command
BPID
is the CPU number and the backup PID number of the line.
I/O ADDR
is the address for the CP6100 line. The four fields displayed are, from left to right,
CHANNEL, PATYPE, CLIPNUMBER, and LINENUMBER. The CHANNEL field is
no longer used. A value of 4 in the PATYPE field indicates that the line is an IP
node. The CLIPNUMBER and LINENUMBER fields identify the line on the
ServerNet wide area network (SWAN) cabinet.
Track Id
is the unique identification of the concentrator (adapter).
The display for a LINE object with the DETAIL option has the following format:
State
is the summary state of the line.
LDEV
is the logical device number of the line.
I/O ADDR
is the address for the CP6100 line. The four fields displayed are, from left to right,
CHANNEL, PATYPE, CLIPNUMBER, and LINENUMBER. The CHANNEL field is
no longer used. A value of 4 in the PATYPE field indicates that the line is an IP
node. The CLIPNUMBER and LINENUMBER fields identify the line on the SWAN
cabinet.
Track Id
is the unique identification of the concentrator (adapter).
CP6100 DETAIL STATUS LINE $CPT5
State............STARTED PPID..............(2,62)
LDEV.............37 BPID..............(3,63)
I/O ADDR.........0,4,%3, %0 CMG Ldev..........76
Track Id....... .A00001 CMG...............$ZZW01
Path.............A In Use............NO
Preferred IP.....172.016.020.054
Alternate IP.....172.016.020.056
CLB Frame Size...300 Config Blk Size...11
Primary Trace....OFF Backup Trace......OFF
Type/Subtype.....(51,1)