CP6100 Configuration and Management Manual

Index
CP6100 Configuration and Management Manual—426741-003
Index-2
B
ADCCP lines (continued)
TRANSLATE modifier 4-11, 4-13, 4-16
TWA modifier 4-17
TWS modifier 4-17
TYPE modifier 4-17
WINDOW modifier 4-18
XFERTIMER modifier 4-8, 4-18
XLENGTH modifier 4-16, 4-18
XOFFSET modifier 4-16, 4-19
ADCCP protocol
defined 4-1
See also protocols
address field 4-3
ALTER command
considerations 8-10
definition 8-10, B-1
syntax 8-10
ALTER LINE
ADCCP attribute-spec 8-11
BSC attribute-spec 8-12
LIU attribute-spec 8-13
MPSB attribute-spec 8-14
ANSI Standard
X3.28 6-1
X3.66-1979 4-1
ARM
general 2-5
ASCII
ADCCP protocol 4-19
Asynchronous Balanced Mode
See ABM
asynchronous operation
MPS-B lines 6-5
Asynchronous Response Mode
See ARM
B
baud rate
MPS-B lines 6-6
Binary Synchronous Communications
(BSC) protocol
See protocols
Bisync
See protocols
BISYNC lines
AUTOCLOSE modifier 5-2
AUTOCONF modifier 5-2
AUTOLOAD modifier 5-2
BSCASCII modifier 5-3
BSCBAUD modifier 5-3
BSCCONNECTTO modifier 5-3
BSCCONTROLCF modifier 5-4
BSCDISCONNECTTO modifier 5-4
BSCFULL modifier 5-4
BSCHALF modifier 5-5
BSCIDEXCHG modifier 5-5
BSCINTERNALCLK modifier 5-5
BSCITBSIZE modifier 5-5
BSCLRC8 modifier 5-6
BSCNONSTOPOFF modifier 5-6
BSCNONSTOPON modifier 5-6
BSCPPNSW modifier 5-6
BSCPPSW modifier 5-7
BSCPTPT modifier 5-7
BSCREADTO modifier 5-7
BSCRETRIES modifier 5-7
BSCSECONDARY modifier 5-8
BSCSYNCS modifier 5-8
BYTESYNC modifier 5-8
CLBFRAMESIZE modifier 5-9
CLBRETIRES modifier 5-9
CLBTIMEOUT modifier 5-9
CLBWINDOW modifier 5-9
CLIPTRACEREC modifier 5-10
CMGLDEV modifier 5-10
CONFIGSIZE modifier 5-10
HIGHPIN modifier 5-11
LOCALPOOLPAGES modifier 5-11