CP6100 Configuration and Management Manual

Index
CP6100 Configuration and Management Manual—426741-003
Index-6
N
MPS-B lines (continued)
MPSBNONSTOPOFF modifier 6-9
MPSBNONSTOPON modifier 6-9
MPSBODD modifier 6-9
MPSBPACE modifier 6-10
MPSBPARITY modifier 6-10
MPSBPOLLINTERVAL modifier 6-10
MPSBRETRIES modifier 6-10
MPSBSWITCHED modifier 6-11
MPSBSYNC modifier 6-11
MPSBTIMEOUT modifier 6-11
MULTI modifier 6-11
NOAUTOCONF modifier 6-12
PROFILEID 6-12
PROGRAM modifier 6-12
RETRIES modifier 6-13
RSIZE modifier 6-13
STARTBOOT modifier 6-13
STARTDOWN modifier 6-13
TESTINT modifier 6-14
TIMEOUT modifier 6-14
TYPE modifier 6-14
MPS-B protocol
defined 6-1
See also protocols
multileaving
HASP 5-7
multiple lines 4-10, 5-12, 6-11, 7-8
Multipoint Supervisor-Burroughs
See protocols
N
Nonsensitive commands 8-7
NonStop system 6-9
Normal Response Mode
See NRM
NRM
general 2-4
O
object files
supported protocols 3-3
Object states 8-4
object-spec syntax 8-4
P
parity 6-10
even 6-7
none 6-9
odd 6-7, 6-9
parity checking 6-7, 6-9
PCP6ADCP profile 4-1
PCP6BSC profile 5-1
PCP6LIU profile 7-1
PCP6MPSB profile 6-1
PINs 4-8, 5-11, 6-5, 7-7
point-to-point
bisynchronous 5-7
poll list
ADCCP lines 4-8
polling 4-11, 4-12, 6-10
Poll/final bit 4-15
PROFILEID 4-12, 5-12, 6-12, 7-9
profiles
PCP6ADCP 4-1
PCP6BSC 5-1
PCP6LIU 7-1
PCP6MPSB 6-1
protocol tasks 2-1
protocols 2-3
ADCCP 2-4, 4-1
associated object files 3-3
Bisync 2-5
Bisync Multipoint Supervisor 2-5
Bisync Multipoint Tributary 2-6
BSC 2-5, 5-1
BSCS 2-5
BSCT 2-6