CP6100 Configuration and Management Manual

Configuration Quick Start
CP6100 Configuration and Management Manual—426741-003
1-3
Log On to the NonStop Server and Obtain SWAN
Information
c. Record the available WAN line number in the line-num field in Example 1-1,
Adding a CP6100 Device. (For example: 1.)
d. Record the configured path that you prefer to use in the path-name field in
Example 1-1, Adding a CP6100 Device. (For example: A.) You can only use
paths that have been configured. The path name is optional.
4. Find out in what processors the SWAN/SWAN2 concentrator is configured by
issuing the INFO ADAPTER command. The INFO ADAPTER command lists the
name of the two TCP/IP processes in which SWAN/SWAN2 is configured.
-> info adapter $zzwan.#swantd
WAN Manager Detailed Info Adapter \FOG.$ZZWAN.#SWANTD
*TrackId........... XR4T7D *TCPIP Name....... $ZTC11
*ALTTCPIP Name..... $ZTC32 Concentrator Type. SYNC
KERNELCODE......... $SYSTEM.CSS00.C7953P00
*SNMPCODE.......... $SYSTEM.CSS00.C7849P00
*HOSTIP Address.... 172.016.035.117
*ALTHOSTIP Address. 172.016.045.119
SUBNETMASK......... %HFFFFFF00
ALTSUBNETMASK...... %HFFFFFF00
a. Issue the STATUS PROCESS command with the TCP/IP processes (noted
above in the INFO ADAPTER display) to find out in what CPU the processes
are running. The STATUS PROCESS command lists the remaining fields to be
supplied for the ADD DEVICE command:
status process $ztc11
TCPIP Status process \FOG.$ZTC11
Status: Started
PPID............. ( 0,319) BPID................ ( 1,292)
Proto Status Laddr Lport Faddr Fport SendQ RecvQ
TCP LISTEN 0.0.0.0 ftp 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 finger 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 echo 0.0.0.0 * 0 0
status process $ztc32
TCPIP Status process \FOG.$ZTC32
Status: Started
PPID............. ( 1,303) BPID................ ( 0,328)
Proto Status Laddr Lport Faddr Fport SendQ RecvQ
TCP LISTEN 0.0.0.0 ftp 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 finger 0.0.0.0 * 0 0
TCP LISTEN 0.0.0.0 echo 0.0.0.0 * 0 0
b. Record the PPID for the TCPIP Name and ALTTCPIP Name (noted above in
the STATUS PROCESS display) in the cpu and altcpu fields in Example 1-1,
Adding a CP6100 Device.