CP6100 Configuration and Management Manual

Configuration Quick Start
CP6100 Configuration and Management Manual—426741-003
1-5
Start the CP6100 Line
You can create one or more line devices with the ADD DEVICE command. The
following example shows the syntax used to create a CP6100 process named
$CP6S1.
For additional information on ADD DEVICE attributes and values, refer to the WAN
Subsystem Configuration and Management Manual.
Start the CP6100 Line
After adding the CP6100 profile and device, issue the SCF START command to the
WAN subsystem to start the device:
start device $zzwan.#cp6s1
Once the line exists in the CP6100 subsystem (as a DEVICE object) and has been
started for the first time, you can start, stop, and change the line directly through the
Subsystem Control Facility (SCF) interface to the CP6100 subsystem as follows:
start line $cp6s1
Example 1-1. Adding a CP6100 Device
-> add device $zzwan.#cp6s1, profile profadcp, &
-> cpu ___________, & (Step 4b)
-> altcpu ___________, & (Step 4b)
-> iopobject $system.sysnn.ocp6css, &
-> type (51,1), &
-> recsize 150, &
-> adapter ____________, & (Step 3a)
-> clip _____________, & (Step 3b)
-> line _____________, & (Step 3c)
-> path _____________, & (Step 3d)