CP6100 Configuration and Management Manual

Overview of the CP6100 Subsystem

CP6100 Configuration and Management Manual—426741-003

2-3

CP6100 Supported Protocols

CP6100 supports several different protocols, line configurations, and station types.

Table 2-1 summarizes the various combinations of protocols, line configurations, and

station types that CP6100 supports.

Primary CP6100 Protocols

CP6100 works with the following asynchronous, bit-synchronous, and

byte-synchronous data link protocols:

•

Advanced Data Communications Control Procedures (ADCCP)

•

Binary Synchronous Communications (BSC)

•

Multipoint Supervisor-Burroughs (MPS-B)

Table 2-1. CP6100 Capabilities

Protocol Line Configuration Station Type

ADCCP-ABM Point-to-Point Combined

ADCCP-ARM Point-to-Point or Multipoint Secondary

ADCCP-NRM Point-to-Point or Multipoint Primary or Secondary

BSC Point-to-Point Primary or Secondary

BSC-Supervisor Multipoint Supervisor

BSC-Tributary Multipoint Tributary

GFDX Any N/A

MPS-B Multipoint Supervisor

SWIFT Point-to-Point Primary or Secondary