CP6100 Configuration and Management Manual

Configuring the CP6100 Subsystem

CP6100 Configuration and Management Manual—426741-003

3-3

Profile Object Files and Associated Protocols

The PROFILE object in the WAN subsystem specifies the protocol to be used on that

particular line. Profiles contain modifiers and default modifier values for the different

CP6100 protocols. You create a profile from an object file provided by HP or from a

previously created profile. This subsection introduces the object files provided by HP

for CP6100

Table 3-1 defines the object files that are provided by HP for CP6100. These object

files are installed in $SYSTEM.SYSnn.

Creating a CP6100 Line-Handler Process

To create a CP6100 line-handler process, you must add a PROFILE object

(“PROFILE” is the SCF object name for the profile file) to the WAN subsystem. Once

the PROFILE object is defined in the WAN subsystem, use the ADD DEVICE

command to define the DEVICE object to the WAN subsystem. Then use the START

DEVICE command to start the line device.

Creating a CP6100 line-handler process involves the following steps:

1. Adding a CP6100 Profile

2. Adding a CP6100 Device

3. Starting the CP6100 Line

Further information on using the WAN subsystem SCF commands to create a CP6100

line-handler process can also be found in the WAN Subsystem Configuration and

Management Manual.

Note. You can use SCF commands from the WAN subsystem to list profiles and to view the

modifiers contained in a profile. The INFO PROFILE command lists the devices that are using

a specified profile and lists modifiers and modifier values contained in the profile. The INFO

DEVICE command can display the profile used for the specified device. For more information

about these SCF commands, refer to the WAN Subsystem Configuration and Management

Manual.

Table 3-1. CP6100 Object Files

Object File Name Profile Name Supported Protocols

$SYSTEM.SYSnn.PCP6ADCP PCP6ADCP ADCCP-ABM, ADCCP-ARM,

ADCCP-NRM

$SYSTEM.SYSnn.PCP6BSC PCP6BSC BSC, BSC-Supervisor, BSC-Tributary

$SYSTEM.SYSnn.PCP6MPSB PCP6MPSB MPS-B

$SYSTEM.SYSnn.PCP6LIU PCP6LIU Generic/third-party