CP6100 Configuration and Management Manual

Contents
CP6100 Configuration and Management Manual—426741-003
ii
3. Configuring the CP6100 Subsystem (continued)
3. Configuring the CP6100 Subsystem (continued)
Creating a CP6100 Line-Handler Process 3-3
Adding a CP6100 Profile 3-4
Adding a CP6100 Device 3-5
Starting the CP6100 Line 3-7
4. ADCCP Protocol and Modifiers
PCP6ADCP Profile 4-1
ADCCP Modifiers 4-2
5. BSC Protocol and Modifiers
PCP6BSC Profile 5-1
BSC Modifiers 5-2
6. MPS-B Protocol and Modifiers
PCP6MPSB Profile 6-1
MPS-B Modifiers 6-1
7. LIU Protocol and Modifiers
PCP6LIU Profile 7-1
LIU Modifiers 7-2
8. Managing CP6100 Using the Subsystem
Control Facility (SCF)
Overview of the CP6100 Subsystem SCF Interface 8-2
SCF Interface to CP6100 8-2
CP6100 Subsystem Objects 8-3
Object States 8-4
SCF Commands and Objects 8-5
Sensitive and Nonsensitive Commands 8-6
Wild-Card Support 8-7
Time Values 8-7
ABORT Command 8-8
Command Syntax for the ABORT Command 8-8
Considerations for the ABORT Command 8-8
Example of the ABORT Command 8-8
ACTIVATE Command 8-9
Command Syntax for the ACTIVATE Command 8-9
Considerations for the ACTIVATE Command 8-9
Example of the ACTIVATE Command 8-9