CP6100 Configuration and Management Manual

ADCCP Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
4-12
ADCCP Modifiers
NRMMODE
See ABMMODE, ARMMODE, or NRMMODE on page 4-2.
POLL
This modifier determines whether periodic polls are sent to a remote station when the
link is idle. POLL enables a heartbeat RR frame for ABM and ARM support at
IDLETIMER intervals when the link is idle. By default, the POLL modifier is in effect.
PROFILEID
This modifier keyword specifies the profile version. This is used to avoid IOPOBJECT
and Profile Version mismatch.
PROGRAM filename
This modifier supplies the simple file name of the NonStop Kernel microcode file to
substitute for the one defined by the profile.
RETRIES
This modifier specifies the number of times the I/O process is to try a request before
reporting an error.
Default: POLL
Units: None
Range: N/A
See
also:
IDLETIMER n on page 4-8
Default: Depends on IPM
Range: Default value cannot be altered
Default: C8169P00
Units: None
Range: C8169P00 (RS232 and RS449)
C8169P20 (X.21)
Default: 3
Units: None
Range: 0 through 63