CP6100 Configuration and Management Manual

Contents
CP6100 Configuration and Management Manual—426741-003
iv
9. PTrace Facility for CP6100
SUSPEND Command 8-29
Command Syntax for the SUSPEND Command 8-29
Considerations for the SUSPEND Command 8-29
Examples of the SUSPEND Command 8-29
SWITCH Command 8-30
Command Syntax for the SWITCH Command 8-30
Considerations for the SWITCH Command 8-30
Example of the SWITCH Command 8-30
TRACE Command 8-31
Command Syntax for the TRACE Command 8-31
Considerations for the TRACE Command 8-33
Examples of the TRACE Command 8-34
VERSION Command 8-34
Command Syntax for the VERSION PROC Command 8-34
Examples of the VERSION Command 8-35
9. PTrace Facility for CP6100
About PTrace 9-1
Recording and Displaying Trace Data 9-2
Determining the Subsystem 9-3
PTrace Commands 9-3
PTrace Commands for CP6100 9-4
Trace Example 9-8
A. CP6100 Subsystem Error Messages
Common Versus Subsystem-Specific Errors A-1
Example of a CP6100 Error A-1
Example of a Common Error A-1
About CP6100 Errors A-2
CP6100 Error 00001 A-2
CP6100 Error 00002 A-2
CP6100 Error 00003 A-3
CP6100 Error 00004 A-3
CP6100 Error 00005 A-3
CP6100 Error 00006 A-3
CP6100 Error 00007 A-4
CP6100 Error 00008 A-4
CP6100 Error 00009 A-4
CP6100 Error 00011 A-4