CP6100 Configuration and Management Manual

BSC Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
5-13
BSC Modifiers
PROGRAM filename
This modifier supplies the simple file name of the NonStop Kernel microcode file to
substitute for the one defined by the profile.
RETRIES
This modifier specifies the number of times the I/O process is to try a request before
reporting an error.
RSIZE 80
This modifier specifies the record length in bytes, which is always 80 bytes for CP6100.
STARTBOOT
This modifier specifies that when the system is cold-started, the LIU is not downloaded
automatically but rather is left in the boot state. You can use SCF to load and start the
LIU. If you specify this modifier you must also specify STARTDOWN.
Default: C1095P00
Units: None
Range: N/A
Default: 3
Units: None
Range: 0 through 63
Default: None
Units: Bytes
Range: N/A
Default: None
Units: None
Range: N/A
See
also:
STARTDOWN on page 5-14