CP6100 Configuration and Management Manual

BSC Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
5-14
BSC Modifiers
STARTDOWN
This modifier specifies that when the system is cold-started, the LIU is not logically
started but rather is left in the stopped state. You can use SCF to start the LIU. If you
specify this modifier you must also specify STARTBOOT.
TESTINT
This modifier specifies the interval for probing the status of the line. A value of zero
means the line is never probed.
TIMEOUT
This modifier specifies the interval that the I/O process is to wait for a response to a
request before retrying.
TYPE (m,n)
For SWAN concentrators, this modifier is mandatory and must be TYPE (51,1),
indicating that the concentrator is managed by the CP6100 subsystem.
Default: None
Units: None
Range: N/A
See
also:
STARTBOOT on page 5-13
Default: 1000
Units: .01 seconds
Range: 0 through 32767
Default: 3000
Units: .01 seconds
Range: 0 through 32767
Default: m must be 51; n must be 1
Units: None
Range: N/A