CP6100 Configuration and Management Manual

MPS-B Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
6-8
MPS-B Modifiers
MPSBFULL
This modifier specifies full-duplex mode (that is, RTS is always on).
MPSBHALF
This modifier specifies half-duplex (that is, switched RTS) operation for the line. By
default, the operation is half-duplex.
MPSBLEASED
This modifier specifies a leased line with a modem (DTR is always on).
MPSBNOAUTODISABLE
This modifier specifies that stations are not automatically disabled upon completion of
a normal read operation.
MPSBNOCONTROLCF
This modifier specifies that the line is turned around regardless of the state of DCD.
Default: MPSBHALF
Units: None
Range: N/A
Default: MPSBHALF
Units: None
Range: N/A
See
also:
MPSBFULL on page 6-8
Default: MPSBLEASED
Units: None
Range: N/A
Default: MPSBNOAUTODISABLE
Units: None
Range: N/A
Default: MPSBCONTROLCF
Units: None
Range: N/A