CP6100 Configuration and Management Manual

MPS-B Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
6-10
MPS-B Modifiers
MPSBPACE n
This modifier specifies the maximum number of consecutive write requests that can be
performed by MPS-B before all stations are polled again. If n is zero, the application
must issue a Halt Poll request prior to any write request.
MPSBPARITY n
This modifier specifies the parity. The value of n determines whether the parity is even,
odd, or none. The parity is set as follows:
These values for n correspond to the SET_CONFIG values.
MPSBPOLLINTERVAL n
This modifier specifies the polling interval. If n is 0, polling is continuous with no waiting
between passes through the polling list.
MPSBRETRIES n
This modifier specifies the number of retries per request before an operation is
terminated.
Default: 0
Units: None
Range: 0 through 32767
Default: MPSBEVEN
Units: None
Range: 0 through 2
Value of n Parity
0Odd
1Even
2None
Default: 0
Units: .01 seconds
Range: 0 through 32767
Default: 3
Units: None
Range: 0 through 32767