CP6100 Configuration and Management Manual

MPS-B Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
6-13
MPS-B Modifiers
RETRIES
This modifier specifies the number of times the I/O process is to try a request before
reporting an error.
RSIZE 80
This modifier specifies the record length in bytes, which is always 80 bytes for CP6100.
STARTBOOT
This modifier specifies that when the system is cold-started, the LIU is not downloaded
automatically but rather is left in the boot state. You can use SCF to load and start the
LIU. If you specify this modifier you must also specify STARTDOWN.
STARTDOWN
This modifier specifies that when the system is cold-started, the LIU is not logically
started but rather is left in the stopped state. You can use SCF to start the LIU. If you
specify this modifier you must also specify STARTBOOT.
Default: 3
Units: None
Range: 0 through 63
Default: None
Units: Bytes
Range: N/A
Default: None
Units: None
Range: N/A
See
also:
STARTDOWN on page 6-13
Default: None
Units: None
Range: N/A
See
also:
STARTBOOT on page 6-13