CP6100 Configuration and Management Manual

LIU Protocol and Modifiers
CP6100 Configuration and Management Manual—426741-003
7-9
LIU Modifiers
NOAUTOLOAD
This modifier specifies that the CLIP software is not to be automatically downloaded
after system generation.
NOAUTOSTOP
This modifier specifies that the CP6100 CAP will not send a line task STOP message
to the CLIP when the last OPEN performs a CLOSE. This modifier is not in effect by
default.
PROFILEID
This modifier keyword specifies the profile version. This is used to avoid IOPOBJECT
and Profile Version mismatch.
PROGRAM filename
This modifier supplies the simple file name of the NonStop Kernel micro code file to
substitute for the one defined by the profile. The PROGRAM modifier must be specified
for the PCP6LIU profile. It can be altered later using SCF.
RETRIES
This modifier specifies the number of times the I/O process is to try a request before
reporting an error.
Default: AUTOLOAD
Units: None
Range: N/A
Default: See description
Unit: None
Range: N/A
Default: Depends on IPM
Range: Default value cannot be altered
Default: $SYSTEM.CSSnn.LIU
Units: None
Range: N/A
Default: 3
Units: None
Range: 0 through 63