CP6100 I/O Process Programming Manual

Index
Managing lines 3-1
MAXFRAME 3-33
MAXLOCALAREA 3-32
Memory management
CP6100 considerations 3-32, A-8
Microcode
Defining to SYSGEN 3-3, 3-5
MPS-Burroughs 1-2
MPS-TINET 1-2
MPSBAUTODISABLE 3-36
MPSBBAUDnnnnn 3-36
MPSBCONTROLCF 3-36
MPSBNOAUTODISABLE 3-36
MPSBNOCONTROLCF 3-36
MPSBPACE 3-36
MPSBPOLLINTERVAL 3-36
MPSBRETRIES 3-36
MPSBTIMEOUT 3-36
MULTI parameter 3-7, 3-32
Multipoint Supervisor-Burroughs 1-2
Multipoint Supervisor-TINET 1-2
NCR Multipoint Protocol 1-2
NOAUTOSTOP 3-8
NONSTOPON A-3
OPEN call 2-5, 2-7
How CMI state affects 3-10/12
Open ID 2-11, A-6
Parameters
Performance impact of various 3-32
PATH
Option in ALTER PROCESS 3-25, 3-29
Path switches A-1, A-9
For load-balancing 3-24
PATHS paragraph 3-3, 3-5
Paths to a line 1-7, 1-12
A and B 3-3, 3-5, 3-24, 3-29
Performance
How to measure 3-22
Potential improvement with 6100 1-12
Revising line parameters to improve 3-32
Performance, monitoring 3-20
PERIPHERALS paragraph 3-3, 3-5, 3-7
Power failures 2-11, A-4, A-7
Primary controller 1-8
Privileged CMI commands 3-9/10
Problem determination 3-38
Processor assignments
After cold load 3-7
Programming
CP6100 2-1
October 1985
Index-5