CRE Programmer's Guide

About This Guide
Common Run-Time Environment (CRE) Programmer’s Guide—528146-004
xviii
Additional Information
Table ii. System Programming Manuals
Manual Description
Guardian Application
Conversion Guide
Explains how to convert C-series file system procedure
calls to use the extended features of the D-series file
system procedure calls.
Guardian Programmer's
Guide
Explains how to use the Guardian programmatic interface
of the NonStop operating system in the Guardian
environment.
Guardian Procedure Calls
Reference Manual
Describes the syntax and programming considerations for
using Guardian system procedures.
Guardian Procedure Errors
and Messages Manual
Describes error codes, error lists, system messages, and
trap numbers for system procedures.
Open System Services
Programmer's Guide
Explains how to use the OSS programmatic interface of the
NonStop operating system in the OSS environment.
Open System Services Shell
and Utilities Reference
Manual
Provides a complete description of OSS commands and
utilities.
Open System Services
System Calls Reference
Manual
Describes the syntax and programming considerations for
using OSS library calls.
TACL Reference Manual Describes the syntax for specifying TACL command
interpreter commands.
TNS/E Native Application
Migration Guide
Gives guidelines for migrating applications from the TNS or
TNS/R environment to the TNS/E native environment.
TNS/R Native Application
Migration Guide
Gives guidelines for migrating applications from the TNS
environment to the TNS/R native environment.
Table iii. Program Development Manuals (page1of2)
Manual Description
Binder Manual Explains how to bind object files using Binder.
Crossref Manual Explains how to collect cross-reference information using
Crossref.
Debug Manual Explains how to debug programs using the Debug
machine-level interactive debugger.
eld Manual Explains how to link TNS/E environment PIC object files
using the eld utility.
Inspect Manual Explains how to debug programs using the Inspect source-
level and machine-level interactive debugger.
ld Manual Explains how to link TNS/R environment PIC object files
using the ld utility and to load object files using the rld utility.