CROSSREF Manual

INTERPRETING CROSSREF OUTPUT
Identifier List
Figure 3-3 shows the identifier header followed by an identifier
reference line.
S5009-002
File
No.
Line
No.
Ref
Code
File
No.
Line
No.
Identifier
Name
Identifier
Qualifier
Attribute
List
File
Name
File
Name
• • •
Figure 3-3. Sample Reference Entry
File Name. The file name is the name of the file in which the
identifier references occur. It is printed on the leftmost field
of the reference line.
File Number. The file number is the number of the file in which
the identifier references occur. It is printed immediately after
the file name.
Line Number. The line number is the number of the program line
in which the identifier reference occurs. There can be several
reference line numbers listed for a file. Each line number is
followed by a reference code.
Reference Code. The reference code describes the type of refer-
ence. There are six codes: blank, D, I, M, P, and W. Table 3-1
describes the reference codes.
3-5