CROSSREF Manual

CROSSREF COMMANDS
HELP Command
HELP COMMAND
The HELP command displays the syntax of CROSSREF commands. The
syntax of the HELP command is:
[ command-name ]
HELP [ / OUT file-name / ] [ param-name ]
[ < param-name > ]
OUT file-name
directs the help output to the specified file. See
the description of the OUT command in this section for
additional information.
command-name
is the name of a CROSSREF command.
param-name
is one of the following parameters: class-name , class-
list , or file-name . The angle brackets are optional.
Considerations
• If you specify HELP without specifying an option, CROSSREF
displays the names of all CROSSREF commands.
• If you do not know how to spell a particular class-name ,
enter HELP command-name , where command-name is the name of
the command with which class-name is associated. CROSSREF
then displays all parameters for that command. ( class-list and
class-name display the same parameters.)
• Make sure that the PDTHELP file resides in the same volume
and subvolume as CROSSREF. If the file is in another place,
CROSSREF cannot print the help information.
4-14