Data Build Manual

Running Data Build

4–6 099331 Tandem Computers Incorporated

Running Data Build When you run Data Build, the Main Menu is displayed, as shown in Figure 4-3. Begin

working at step F1 and go through each step in succession until you have converted

the input files.

To start Data Build, volume to the conversion project subvolume and:

1. Cold start the Pathway system by entering:

1> OBEY XSTART

The cold start displays on your terminal, and when finished, the TACL prompt

returns.

2. Start Data Build by entering:

2> OBEY XRUN

This displays the Main Menu.

Figure 4-3. Main Menu

T a n d e m D a t a B u i l d DATA CONVERSION FACILITY

==============================================================================

F1 - CONFIGURE Conversion Environment

F2 - BUILD Data Definitions & Run DDL Compiler

F3 - GENERATE Conversion Procedures, Compile & Execute

F4 - CREATE Conversion Program, & Compile

F5 - RUN Data Conversion Program

==============================================================================

F8-DDL F9-FUP F10-EDIT F11-SQLCI F12-PERUSE SF16-EXIT