Data Transformation Engine 6.7.1 Readme

ManualsBrandsHP ManualsServerHP NonStop G-Series

NonStopDTE6_7_1Readme.TXT

READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION

Product Name: NonStop Data Transformation Engine 6.7.1

Product ID: SJ54V3, SJ55V3, SJ56V3

Component Products:

T0586V03 - NonStop DTE Core

T0550V03 - NonStop DTE Tuxedo Transformation Server

T0578V03 - NonStop DTE CORBA Transformation Server

T0579V03 - Mercator Design Workstation

I. Basic Product Installation Instructions

1. Ensure that requirements for using this product are met

(see Section IV Product Requirements below).

2. Ensure that prerequisites for the installation utility and any

product-specific installation requirements are met

(see Section V Installation Prerequisites below).

3. Review the file USRGUIDE.PDF (in the subdirectory NSK_SW on this

CD) containing the IPSetup User Guide, which provides instructions

for using IPSetup, a utility provided on the CD that enables

installation of Independent Products. You need Adobe Acrobat

Reader to read or print the IPSetup User Guide. Visit Adobe's

website to download the latest Adobe Acrobat Reader:

http://www.adobe.com

4. Decide whether you will use DSM/SCM to move files to Installation

Subvolumes (ISVs) after files are placed on the workstation. Using

DSM/SCM is optional, but is recommended when DSM/SCM is available.

5. Follow the pre-installation instructions in Section II below, if

any, before continuing to Step 6.

6. Run IPSetup to place (move files from the CD to the workstation)

and install (move NonStop Kernel files to correct ISVs) this

product. If TCP/IP and FTP are unavailable, or if you have problems

with automatic file placement, use the instructions in the IPSetup

User Guide section "Manual Software Placement Using the IPSetup

TACL Program" to manually place NonStop Kernel files.

This product contains both NonStop Kernel components and workstation

components. You must place each component type separately. To

restart the installation program after placing the first component

type, click SETUP.EXE in the root directory.

IMPORTANT: Always reinstall this product after using the

Install product to install a Site Update Tape (SUT).

Installing a SUT using the Install product can result in

overwriting this Independent Product with older versions of

software. This problem does not occur when using DSM/SCM

to install SUTs.

7. Follow the post-installation instructions in Section III below, if

any, after using IPSetup to place and install this product.

II. Pre-Installation Instructions

None

Page 1

Summary of content (7 pages)

PAGE 1
NonStopDTE6_7_1Readme.TXT READ THIS FILE COMPLETELY BEFORE BEGINNING PRODUCT INSTALLATION Copyright 2004 HP Product Name: NonStop Data Transformation Engine 6.7.1 Product ID: SJ54V3, SJ55V3, SJ56V3 Component Products: T0586V03 - NonStop DTE Core T0550V03 - NonStop DTE Tuxedo Transformation Server T0578V03 - NonStop DTE CORBA Transformation Server T0579V03 - Mercator Design Workstation I. Basic Product Installation Instructions 1.
PAGE 2
NonStopDTE6_7_1Readme.TXT III. Post-Installation Instructions Step Step Step Step Step 1: 2: 3: 4: 5: Install the NSDTE Core Install NSDTE Tuxedo Server or NSDTE Corba Server or both. Set up the OSS environment for NSDTE Run sample transformation map Install the Design Studio on PC workstation. If you want to link custom user developed adapters to the Command Server or Tuxedo server or the CORBA Server, refer to the NonStop DTE Services Guide for instructions.
PAGE 3
NonStopDTE6_7_1Readme.TXT Step 2.1: NSDTE Tuxedo Server Installation : -----------------------------------------You must have installed the NSDTE Core files before you can install NSDTE Tuxedo Server. After you have copied the appropriate NSDTE Tuxedo Server pax file from the product compact disc to your system, follow these steps to unpack the NSDTE Tuxedo Server product files and install them: 1.
PAGE 4
NonStopDTE6_7_1Readme.TXT TACL prompt: > osh 2. Verify the directory named /usr/tandem exists and that the current userid has write access to the /usr directory. 3. By default, the pax command into the directory location If you want to install in If you want to install in installs the NSDTE Corba Server files "/usr/tandem/nsdte/" the default location perform step 4. a custom location perform step 5. 4.
PAGE 5
NonStopDTE6_7_1Readme.TXT 2. Change directory to the ExitExample directory and execute a map using the Mercator Command Server. mercator Exit_Example.nsk 3. The Map executes and creates the output in Exittest.out. Step 5: Mercator Design Workstation Installation: -----------------------------------------------Following are the steps to install Design Workstation: (To install the English version from CD #2) 1. Install the Design Studio 6.7.1. Run the setup.exe from \WS_SW\Design Studio 6.7.1.
PAGE 6
T9552G06 T9750G06 T8344D44 T8698D46 T8996V60 T2818C11 T0083V31 T2766V10 T8351D46 NonStopDTE6_7_1Readme.TXT TCP/IP FTP Safeguard NS TS/MP Pathmon NS TM/MP ITP WEBSERVER NonStop CORBA 2.6.1 (for NSDTE Corba Server) NSJAVA 3.1 (for NSDTE-CORE) NSJAVA 4.0 (for NSDTE Corba Server) NonStop Tuxedo 6.5 Core Services (for NSDTE Tuxedo Server) T8354D46 T0252D46 T1050G10 T7969G10 T7968G08 T8668D35 T0338V20 NonStop Tuxedo/Q 6.
PAGE 7
IPSETUP.EXE NonStopDTE6_7_1Readme.TXT File containing the main executable for IPSetup. IPSETUP.HLP File containing help text for IPSetup. LICENSE.TXT File containing limited-use Software Licensing Agreement with the licensing terms governing this product. README.TXT File containing product and installation information (this file). SETUP.EXE File containing the Launcher executable. NSK_SW Subdirectory containing HP NonStop platform component files for T0586, T0550, T0578 products.