Data Transformation Engine Execution Commands Reference Guide

Chapter 1 - Executing Maps Command Server Overview
Execution Commands Reference Guide
9
Integration Flow Designer
Using the Integration Flow Designer, you can create systems of maps and define
execution settings, map settings, and input/output settings. These settings are
recorded into the compiled map file that results from building the map within the
Integration Flow Designer.
If the system has an execution mode of Command, a command file can be
generated that can be executed with a Command Server. Edit this command file
as desired using the appropriate execution commands and options.
The following is an example of a command file generated by the Integration Flow
Designer for a system named Inbound EDI:
;
;
; Date: Wed Jun 16 18:15:15 2001 (Version 6.0(126))
; File: D:\MapsAndTrees\ANSIACK\ProcessEDI.msd
; System: Inbound EDI
;
; Component: ReceiveEDI
; Map File: D:\MapsAndTrees\ANSIACK\Audit997.mms
; Executable Map: ReceiveEDI
;
D:\MapsAndTrees\ANSIACK\ReceiveEDI.mmc
-GR
;
; Component: ACK997
; Map File: D:\MapsAndTrees\ANSIACK\Audit997.mms
; Executable Map: ACK997
;
D:\MapsAndTrees\ANSIACK\ACK997.mmc
-OF1BR10:2 'OutboundACK.EDI'
;
; End System: Inbound EDI
;
Notice that the execution settings defined in an Integration Flow Designer
command file correspond with the execution commands and options. Refer to the
Integration Flow Designer Reference Guide for more information.