Data Transformation Engine FTP Adapter Reference Guide

FTP Adapter Reference Guide
37
Appendix A - Return Codes and Error
Messages
Return codes and messages are returned when the particular activity completes.
Return codes and messages may also be recorded as specified in the audit logs,
trace files, execution summary files, etc.
Messages
The following is a listing of all the codes and messages that can be returned as a
result of using the FTP adapter for sources or targets.
Note Adapter return codes with positive numbers are warning codes that indicate a
successful operation. Adapter return codes with negative numbers are error codes
that indicate a failed operation.
Return Code Message
0 OK
-1 Insufficient memory to continue
-1 Library Initialization Failed
-2 Invalid Entry Point. (AIX adapters only)
-3FTP Could not load adapter
-3 Error Sending Data
-4 Error Receiving Data
-5 FTP: Insufficient memory to continue
1 No data provided. Create on content specified: no
data sent.
2 Could not interpret STOU response! Target file will
not be renamed.
-1 FTP Setup failed
-1 FTPRecv() failed
-1 FTPSend() failed
-101 No URL was specified