Data Transformation Engine Integration Flow Designer Reference Guide

Chapter 11 - Deploying Systems Using Deploy Scripts
Integration Flow Designer Reference Guide
144
To configure a script command
Under Script Commands, do one of the following:
♦ Select the script command and click Details.
♦ Double-click the script command name.
Each script command is described in the next section.
To add a deploy script
1 Open the system that requires the deploy script.
2 From the System menu, select Deploy > Definitions. The scripts listed are
associated with the system whose window was active prior to running the
Deploy command.
3 When the Define Deploy Scripts dialog appears, click Add.
4 When the Add Deploy Script dialog appears, give the new deploy script a
name and click OK. The script name must be unique within the active system.
To remove a deploy script
1 Open the system containing the deploy script to be removed.
2 From the System menu, select Deploy > Definitions. The scripts listed are
associated with the system whose window was active prior to running the
Deploy command.
3 Do one of the following:
♦ Select the script to be removed, and click Remove.
♦ Right-click the name of the script to be removed and select Remove from
the context menu.