Data Transformation Engine Integration Flow Designer Reference Guide

Chapter 6 - Map Components What is a Map Component?

Integration Flow Designer Reference Guide

Defining Sources and Targets for a Pseudo Map

After a pseudo map is added to a system file, you can define sources and targets

by adding input and output cards.

To add an input card

1 Right-click the pseudo map icon and select Add Input Card from the context

menu.

The Add Input Card dialog appears.

2 In the CardName field, enter a unique name for the input card. This is the

only required field, however you can specify other values as needed.

Note If you choose to specify the TypeTree and Type values, they must

reference a valid type in an existing tree. Refer to the Map Designer

Reference Guide for more information.

3 Click OK to add an input card.

Editing Input and Output Cards

The settings for an input card or an output card can be modified any time after the

card has been added.

To edit an input or output card

1 Right-click the input or output card icon and select Edit from the context

menu.

2 Make your changes to the card settings and click OK to save changes.

To delete an input or output card

1 Right-click the input or output card icon and select Delete from the context

menu.

2 Click Yes when a dialog appears to confirm the deletion.