Data Transformation Engine Integration Flow Designer Reference Guide

Chapter 6 - Map Components Working with Map Components
Integration Flow Designer Reference Guide
93
TimeEvent Setting Description
♦ 0 - The 0 setting is used to omit the 0 hour
(midnight to 1:00 am). The default value for
the 0 setting is
No.
♦ 1 through 23 - These settings work the same
way as the 0 setting (above).
SkipIfBusy Use the SkipIfBusy setting to ignore the time event
trigger if it occurs when a watch instance is already in
process. The default value is Yes.
EventCoordination Use the EventCoordination setting to control the
coordination of time event and input event triggers. The
EventCoordination setting is available only if the map
has both a time event trigger and one or more input
event triggers; and the SourceEvent setting for one of
the input cards is ON. The input event trigger can have
wildcards. The default value for the EventCoordination
setting is FirstAvailable.
Pending Instance Thresholds
The Pending Instance Thresholds enables a listener to pause or resume for a
specific watch.
Setting Description
Hi Value (no limit) for the watch to pause the event(s) for that watch.
The default value is 0.
Low Value (no limit) for the watch to resume the event(s) for that watch.
The default value is 0.
Note If the InitPendingHigh and InitPendingLow settings in the Launcher section of
the mercator.ini file are also set, the Pending Instance Thresholds Event
Server settings will take precedence.