Data Transformation Engine Integration Flow Designer Reference Guide

Chapter 6 - Map Components Working with Map Components
Integration Flow Designer Reference Guide
94
Input and Output Settings
Because maps executed with a Command Server can only override those input
and output settings that have corresponding execution commands, some input
and output settings are not configurable in the IFD.
Note If you are using cluster support for the Event Server, the system definition file
(.msd) is a key factor in the behavior of file triggers. The OnSuccess card setting
must be set to Delete to prevent the file from being processed more than once.
Input Settings
The following table lists input settings.
Tip For help on individual settings in the IFD, right-click the setting and choose Help,
or select the setting and press F1.
Input Setting
Command Server
Settings
Event Server
Settings
FetchAs –
√
WorkArea
√ √
Backup –
√
SourceEvent –
√*
Source
Command
√ √
OnSuccess –
√*
OnFailure
√ √
Retry
√ √
Scope –
√
Warnings -
√
FetchUnit –
√
*Availability varies by adapter.