Data Transformation Engine Map Designer Reference Guide

Chapter 10 - Map Settings MapTrace Settings
Map Designer Reference Guide
177
InputContentTrace
Specify options of which input data is traced. The default value for the Detail
setting is All.
Value Description
Off Trace input data for the map will not be created
All Trace all inputs.
Card# Trace a single input. Specify the input map card by typing the
number of the map card into the value field of the Card#
setting.
Range Trace a range of input objects. Specify the beginning object by
typing the number of the object into the value field of the
Start setting. Specify the ending object by typing the number
of the object into the value field of the End setting.
CardNumber
To trace a single input trace, enter the card number. For example, to include only
messages about card 2 in the trace file, enter 2.
InputContentTrace > StartObject
Enter the beginning object number to be traced. For example, to trace data
objects 1000 to 2000, enter 1000 as the Start value.
InputContentTrace > EndObject
Enter the ending object number to be traced. For example, to trace data objects
1000 to 2000, enter 2000 as the End value.
Using Ranges for InputContentTrace
The range specified for objects is not precise. The intention is to reduce the
number of objects in the trace file, not to specify precise objects. To trace the first
object, specify a Start range of 0 (not 1).
The object number is not provided in the trace file. Providing a range is an
attempt to trace less than the whole, not a precise range of objects.