Data Transformation Engine Map Designer Reference Guide

Chapter 10 - Map Settings Validation Settings
Map Designer Reference Guide
181
Century
The Century setting specifies the current or sliding century. The default value for
the Switch setting is Current.
Value Description
Current Missing century numbers are derived based on the current
system date.
Sliding Enables SlidingCentury options. Missing century numbers
are derived based on the value of the CCLookup setting.
Century > CCLookup
The CCLookup setting specifies the first year in a 100-year range used to derive a
missing century for a date item, using CCYY format. The default value for the
CCLookup setting is 1950.
For example, if the value of the CCLookup setting is 1960, a YYMMDD formatted
date between 1960 and 1999 is interpreted as having a century date of 19, while
dates between 2000 and 2059 are interpreted as having a century date of 20. In
this case,
♦ 600101 is assigned a century of 19
♦ 580101 is assigned a century of 20
Value Description
n
Enter a number in CCYY format that represents the start of a
100-year range. Valid numbers are 1 to 9999.
Validation Settings
Validation settings specify how strictly the data is validated by specifying
response behavior for types of validation errors.