Data Transformation Engine Map Designer Reference Guide

Chapter 16 - Map Audit Auditing Data Content
Map Designer Reference Guide
248
Data Settings in the Audit Log Sample
A sample of the input and output data settings is:
<DataSettings>
<InputData card="1" CardMode="Integral" WorkArea="!Reuse">
<Backup switch="OFF"></Backup>
<Source adapter="File" OnSuccess="Keep" OnFailure="Rollback" Scope="Map"
Warnings="Ignore">
<Resource>C:\mercator\Examples\stores.txt</Resource>
<Retry switch="OFF"></Retry>
</Source>
</InputData>
<InputData card="2" CardMode="Integral" WorkArea="!Reuse">
<Backup switch="OFF"></Backup>
<Source adapter="File" OnSuccess="Keep" OnFailure="Rollback" Scope="Map"
Warnings="Ignore">
<Resource>C:\mercator\Examples\CALLS.TXT</Resource>
<Retry switch="OFF"></Retry>
</Source>
</InputData>
<OutputData card="1">
<Backup switch="OFF"></Backup>
<Target adapter="File" OnSuccess="Keep" OnFailure="Rollback" Scope="Map"
Warnings="Ignore">
<Resource>C:\mercator\Examples\summary.txt</Resource>
<Retry switch="OFF"></Retry>
</Target>
</OutputData>
</DataSettings>
Map Settings in the Audit Log
The MapAudit > Switch = On and the SettingsAudit > Map = On map
settings produce an audit log with map setting information.
Map settings are defined in the Map Settings dialog box and include:
♦ Map audit settings ♦ Audit log location
♦ Map trace information ♦ Work space information
♦ Paging scheme ♦ Century information
♦ Validation specifications