Data Transformation Engine Map Designer Reference Guide

Chapter 18 - Error and Warning Messages Map Build Error Messages
Map Designer Reference Guide
280
Return Code Message
M117
Map: x Output: y
Cannot assign an output to itself.
Hint: You might have accidentally dragged and dropped an output
into its own rule cell. Edit the rule.
M118
Map: x Output: y
Rule references unknown comment: commentname @
inputname
Hint: The input card type does not have a floating component, or
you have incorrectly typed in the name. If the input card has a
floating component, on the Card menu, the Show Floating
Component Type option will be activated.
M119
Map: x Output: y
Output argument of rule is not a partition of
output type.
Hint: If the rule contains the name of a functional map, go to the
functional map and edit the output card. Make sure the type of the
output card is the output y, or a partition of the output y.
M120
Map: x Output: y
Operand is an invalid operand.
Hint: For information on operands, see the Functions &
Expressions Reference Guide.
M121
Map: x
Input card #cardnumber uses invalid tree.
Hint: You may have moved the type tree or map source from its
original location. You may have incorrectly entered the name of
the type tree.
M122
Map: x
Output card #cardnumber uses invalid tree.
Hint: You may have moved the type tree or map source from its
original location. You may have incorrectly entered the name of
the type tree.