Data Transformation Engine Map Designer Reference Guide

Chapter 5 - Card Settings SourceRule Input Card Settings
Map Designer Reference Guide
80
The content of an input card is defined with the CardName, TypeTree and Type
settings. These settings define what the data is, but does not specify how to
retrieve the data. The Source, FetchAs, WorkArea and FetchUnit card settings
are some of the SourceRule settings that define how the data is retrieved for
each input card.
To define SourceRule settings
1 Select the input card.
2 From the Card menu, choose Edit.
The Edit Input Card dialog box is displayed.
3 Enter desired values for SourceRule settings.
SourceRule Setting Overrides
Input card settings are stored in the compiled map. You can override the setting
for each option from other applications, including the Command Server, Event
Server, and Integration Flow Designer.
Execution commands can be used to override the map settings or card settings
compiled into the compiled map when a map is run. See the Execution Commands
Reference Guide for a complete description of the override execution commands.