DCE Installation, Configuration, and Management Guide

Managing a DCE Cell
HP NonStop DCE Installation, Configuration, and Management Guide—429552-005
7-6
Troubleshooting the CDS Server:
Troubleshooting the CDS Server:
1. Issue a directory show /.:/ command to dcecp to verify that CDS is
functioning correctly. For example, this output shows that CDS is functioning
correctly:
{RC_ClassVersion {01 00}}
{CDS_CTS 1995-11-20-17:49:14.934044100/08-00-83-00-21-d7}
{CDS_UTS 1995-11-20-17:50:53.055468100/08-00-83-00-21-d7}
{CDS_ObjectUUID c023e4bc-2363-11cf-880f-08008e0021d7}
{CDS_Replicas
{{CH_UUID c01b133c-2363-11cf-880f-08008e0021d7}
{CH_Name /.../dce/domain.company.com/dce_ch}
{Replica_Type Master}
{Tower {ncacn_ip_tcp 123.234.123.212}}
{Tower {ncadg_ip_udp 123.234.123.212}}}}
{CDS_AllUpTo 0}
{CDS_Convergence medium}
{CDS_InCHName new_dir}
{CDS_DirectoryVersion 3.0}
{CDS_ReplicaState on}
{CDS_ReplicaType Master}
{CDS_LastSkulk 1995-11-20-17:49:14.934044100/08-00-8e-00-21-
d7}
{CDS_LastUpdate 1995-11-20-17:49:28.117510100/08-00-8e-00-21-
d7}
{CDS_Epoch c023e174-2363-11cf-880f-08008e0021d7}
{CDS_ReplicaVersion 3.0}
2. If cdsd is running on this host, verify that TMF is running by issuing a status
tmf command to TMFCOM. For example, at a dcecp prompt, enter:
gtacl -p tmfcom status tmf
This output shows that TMF is functioning correctly:
TMF Status:
System: \DCE, Time: 27-Oct-1995 14:52:15
State: started
Transaction Rate: 0.0 TPS
AuditTrail Status:
Master
Active audit trail capacity used: 13%
First pinned file: $DSV.ZTMFAT.AA000135
Reason: Current file
BeginTrans Status: ENABLED
Catalog Status:
Status: up
3. Verify that the clearinghouse status is correct by entering this command from a
dcecp prompt:
clearinghouse verify {clearinghouse catalog}
If the status is good, no output is returned.