DCE Installation, Configuration, and Management Guide

Managing a DCE Cell
HP NonStop DCE Installation, Configuration, and Management Guide—429552-005
7-8
When All Else Fails
2. If dtsd is on this host, verify that DTS is functioning correctly by entering this
command at a dcecp prompt:
dts show
This output shows that DTS is functioning correctly:
{checkinterval +0-01:30:00.000I-----}
{epoch 0}
{tolerance +0-00:05:00.000I-----}
{tdf -0-08:00:00.000I-----}
{maxinaccuracy +0-00:00:00.100I-----}
{minservers 3}
{queryattempts 3}
{localtimeout +0-00:00:05.000I-----}
{globaltimeout +0-00:05:15.000I-----}
{syncinterval +0-00:02:00.000I-----}
{type server}
{courierrole backup}
{actcourierrole noncourier}
{clockadjrate 100000 nsec/sec}
{maxdriftrate 25000 nsec/sec}
{clockresolution 1000 nsec}
{version V1.0.1}
{timerep V1.0.0}
{provider yes}
{autotdfchange no}
{nexttdfchange 1996-04-07-03:00:00.000-07:00I0.000}
{serverprincipal hosts/dce/self}
{serverentry hosts/dce/dts-entity}
{servergroup subsys/dce/dts-servers}
{status enabled}
{uuid 00000066-2362-21cf-8000-08008e0021d7}
When All Else Fails
1. From the main menu, select dce_config option 4 (STOP) to completely shut
down the cell. This clean shutdown removes credentials files that, if left on a
machine, might interfere with the restart of DCE.
2. From the main menu, restart the cell by selecting dce_config option 3 (START).
Changing the DCE Host IP Address
To change the IP address of a DCE host, proceed as follows:
1. Login to a cell as a privileged network user (that is, cell_admin).
2. If the security server is running on that IP address, enter:
cdsp > remove obj /.:/subsys/dce/sec/master CDS_Towers
3. Modify the dce_cf.db file with the new TCP/IP process name and IP address.