DCE Installation, Configuration, and Management Guide

dce_config(8) Reference Page
HP NonStop DCE Installation, Configuration, and Management Guide—429552-005
B-7
DCED_ADMIN Specifies whether the administrative group
dced-admin should have permission to access and
modify the access control lists that protect dced
objects.
The value y allows the administrative group to
access and modify local dced objects. If you use
the value y, a privileged network user such as
cell_admin is allowed local privileged access to the
machine.
The value n restricts access and modification
permission to the local host principal. If you use the
value n, security is greater but remote dced
management is severely restricted.
The default value is y.
DCEVH Specifies the host name assigned to the virtual host
for which operations are currently being performed.
Used by dce_config, DCE demons, application
servers, and clients.
The hostname DCEVH cannot exceed 85
characters and should not contain any non-
alphanumeric characters other than dot (.) , hyphen
(-), or underscore (_). If the hostname contains a
dot, only the part prior to the dot is taken as a valid
hostname. The hostname should start with
alphanumeric characters or an underscore.
If DCEVH is not specified, but
TCPIP_PROCESS_NAME is specified, the host
name is derived from the host name attribute of the
TCP/IP process.
If neither DCEVH nor TCPIP_PROCESS_NAME is
specified, the default value of DCEVH is the name
of the virtual host containing the /opt/dcelocal
directory. If the /opt/dcelocal directory is not
available, a default process name of /G/ZTC0 is
assumed and the default value of DCEVH is the
hostname attribute of /G/ZTC0.
If TCPIP_PROCESS_NAME and DCEVH are both
specified, then the value specified for DCEVH is
used.
Table B-1. dce_config Environment Variables (page 4 of 9)
Variable Value