DCE Installation, Configuration, and Management Guide

dce_config(8) Reference Page
HP NonStop DCE Installation, Configuration, and Management Guide—429552-005
B-9
HOST_NAME_IP Specifies the IP address of the virtual host on which
dce_config is running.
KEYSEED Specifies the character string used to seed the
random key generator to create the master key for
the master database and each slave database.
Each database has its own master key and
keyseed. Used in security server configuration.
LAN_NAME For a multiple-LAN configuration, specifies the
internal name of the LAN (in the LAN profile). Used
in CDS server configuration.
LOG_THRESHOLD Specifies the minimum priority log messages to
write to the log file, /tmp/dce_config.log. Valid
values are ERROR, WARNING, SUMMARY,
DETAIL, VERBOSE, and DEBUG.
The default value is VERBOSE.
MULTIPLE_LAN Indicates whether to configure the node with
multiple-LAN capabilities:
The value
y indicates configure the node with
multiple-LAN capabilities; n indicates do not.
The default value is n. Used in CDS configuration.
PWD_MGMT_SVR Specifies the pathname for the Password
Management server. The default value is
/opt/dcelocal.hostname/bin/pwd_strengthd. Used
in Password Management server configuration.
PWD_MGMT_SVR_OPTIONS Specifies the default options for the Password
Management server (pwd_strengthd). The value
of the variable is set to -v (verbose) at server
configuration.
REMOVE_PREV_CONFIG Indicates whether to remove all remnants of
previous configurations before performing the new
install.
The value
y indicates remove all remnants; n
indicates do not.
The default value is n.
If you set this variable to y, dce_config removes all
configured components each time you configure
any component, and you must reconfigure them all.
Used in all component configurations.
Table B-1. dce_config Environment Variables (page 6 of 9)
Variable Value