DCE Installation, Configuration, and Management Guide

dce_config(8) Reference Page
HP NonStop DCE Installation, Configuration, and Management Guide—429552-005
B-11
SYNC_CLOCKS Indicates whether to synchronize all client clocks
with the security server clock.
The value y indicates that client and server clocks
will be synchronized; n indicates they will not be
synchronized.
The default value is y.
If this variable is set to n, and if clocks are out of
synchronization by more than the value specified in
the TOLERANCE_SEC variable, the user is
prompted to synchronize them. This variable is
valid only if the check_time variable is set to y.
TANDEM_ALT_SRL Controls whether the shared resource library is
placed in an alternate location.This value is a
Guardian filename expressed in OSS pathname
format; for example, /G/volume/subvol/ldce.
The default value is "", meaning that the shared
resource library is placed in /G/system/zdce/ldce.
TANDEM_INSTALL_DIR Specifies the location of the pax files for installation.
This value is a Guardian subvolume name
expressed in OSS pathname format; for example,
/G/isv/zdce.
TCPIP_PROCESS_NAME Specifies the Guardian process name (for
conventional TCP/IP), the TCPSAM process name
(for Parallel Library TCP/IP), or the TCP6SAM
process name (for TCP/IPv6 configured in DUAL
mode) for the TCP/IP stack of the virtual host.
If neither DCEVH nor TCPIP_PROCESS_NAME is
specified, the default value of DCEVH is the name
of the virtual host containing the /opt/dcelocal
directory. If the /opt/dcelocal directory is not
available, a default process name of /G/ZTC0 is
assumed and the default value of DCEVH is the
hostname attribute of /G/ZTC0.
If TCPIP_PROCESS_NAME and DCEVH are both
specified, then the value specified for DCEVH is
used.
TIME_SERVER Specifies the virtual host that the security client will
try to synchronize its clock against. This host must
have a DTS server (dtsd) running on it. The
recommended choice for the host is the one
running the master security server (the name
specified in the SEC_SERVER variable).
Table B-1. dce_config Environment Variables (page 8 of 9)
Variable Value