Distributed Name Service (DNS) Management Operations Manual

ADD SS
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–31
ADD SS The ADD SS command is used to define a subsystem to DNS. This command may be
used only in definition mode. For more information about using the ADD command,
see “Notes About ADD Commands” at the beginning of this section.
ADD [ SS ] subsystem [ LIKE a subsystem [ at-part ] ]
[ , parameter ] ...
where at-part is:
AT { \ system | name manager }
SS
may be omitted if the default object is SS.
subsystem
is the name of the subsystem being added.
a subsystem
a subsystem whose creation values are to be used, overriding those of a previous
SET SS command.
{ \ system | name manager }
is a system or name manager where a subsystem is defined. If omitted, the
current name manager is assumed.
\ system is a Guardian 90 system name. It designates a node other than the
current system for processing the command. name manager designates a
configuration other than the current one.
parameter
is one of the following:
OWNER owner
owner
names the company that defines the subsystem.
SSNUM integer
integer
uniquely identifies the subsystem within owner ; must be a nonzero value
between -32767 and 32767.