Distributed Name Service (DNS) Management Operations Manual

ADD SSOBJECT
The DNSCOM Commands
7–36 31258 Tandem Computers Incorporated
ADD SSOBJECT The ADD SSOBJECT command defines a subsystem object (ssobject) and, optionally,
one or more aliases. For more information about using the ADD command, see
“Notes About ADD Commands” at the beginning of this section.
ADD [ SSOBJECT ] ssobject
[ LIKE an ssobject [ UNDER manager ] [ at-part ] ]
[ , parameter ] ...
where at-part is:
AT { \ system | name manager }
SSOBJECT
may be omitted if the default object is SSOBJECT.
ssobject
is the subsystem-object name to be added.
an ssobject
is the subsystem object whose creation values are to be used.
manager
manager is the name of a subsystem manager, which must be specified if the
subsystem-object name is not unique.
{ \ system | name manager }
is a system or name manager where an ssobject is defined. If omitted, the
current name manager is assumed.
\ system is a Guardian 90 system name. It designates a node other than the
current system for processing the command. name manager designates a
configuration other than the current one.
parameter
is one of the following:
ALIASES [ + | - ] { alias-spec }
{ ( alias-spec [ , alias-spec ]...) }
Specifies the aliases to be defined for the object being defined.