Distributed Name Service (DNS) Management Operations Manual

ALTER DNSPROCESS
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–59
ALTER DNSPROCESS DNS processes are altered using the following syntax:
ALTER [ DNSPROCESS ] { DNS-EXPORTER }
{ DNS-MANAGER }
[ AT { \ system | config file } ] , parameter
[ , parameter ] ...
\ system
is the name of a system. The name of the configuration file to be altered is derived
by applying this system to the name of the current configuration file.
config file
is the name of a DNS configuration file previously created using the INITIALIZE
DNS command. If specified, this file name is expanded using the current
CMDSYS and CMDVOL settings and determines the DNS configuration to be
altered.
If AT is not included in the command, the configuration file used in the command
is the current configuration file.
parameter
is one of the following:
CPUS ( pri-cpu , backup-cpu )
pri-cpu and backup-cpu
are integers with a value in the range of 0 through 15. pri-cpu may not
be equal to backup-cpu .
PRIORITY priority
priority
is an integer in the range of 1 through 199.
PROCESSNAME process name
process
is a valid Guardian 90 process name in local format.