Distributed Name Service (DNS) Management Operations Manual

INFO COMPOSITE
The DNSCOM Commands
7–110 31258 Tandem Computers Incorporated
composite type *
means that all composites of the specified type on the local system (or in the
specified group or group-on-system) are to be included for display.
{ \ system-2 | name manager }
indicates a system or name manager to where the command is to be directed. If
omitted, the current name manager is assumed.
\ system-2 is a Guardian 90 system name. It designates a node other than the
current system for processing the command. name manager designates a
configuration other than the current one.
GROUPS
means that the groups of which the composite is a member are to be displayed.
DETAIL
is the same as GROUPS.
OBEYFORM
controls the format of the display information. DNSCOM displays each attribute
as a syntactically correct SET or ALTER command. This allows you to obtain a
copy of the commands needed to duplicate a currently defined name or set of
names.
See the subsection “Notes About INFO Commands (OBEYFORM Considerations)”
at the beginning of this section for additional information about OBEYFORM,
including examples.
Examples
INFO RDS_T4, DETAIL
INFO COMPOSITE * IN MEMPHIS
INFO /OUT COMPS/COMPOSITE * ON \MADRID AT \MADRID.$RDNS, &
OBEYFORM
DNSCOM_INFO ATM44, GROUPS
ATM44 : COMPOSITE
COMPONENT
LU IN SNAX $LINE1.#ATM44
TERM IN PATHWAY ATM44 UNDER $PM
SESSION IN SNAXHLS #LINE1.ATM44 UNDER $HLS4
DOMAIN ALL-NCNS
GROUPS SAN-FRANCISCO
OWNER EZCORP
TYPE ATM
TYPENUM 1