Distributed Name Service (DNS) Management Operations Manual

INFO DNSPROCESS
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–119
INFO DNSPROCESS The INFO DNSPROCESS command displays information about a DNS process or set
of DNS processes. The information consists of the CPUs where the process is to run,
the name of the event log, the execution priority, the program file name, and the swap
volume name.
INFO [ / OUT file name / ]
{ [ DNSPROCESS ] dns process | DNSPROCESS * }
[ at-part ] [ , OBEYFORM ]
[ USING config file ]
where at-part is:
AT { \ system | name manager }
file name
is a Guardian 90 file name to which the list output may optionally be directed. If
omitted, the list is written to the current DNSCOM OUT file.
dns process
is the name of a DNS process for which information is to be displayed.
DNSPROCESS *
means that all DNS processes in the command name manager’s database are to be
included for display.
{ \ system | name manager }
indicates a system or name manager to where the command is to be directed. If
omitted, the current name manager is assumed.
\ system is a Guardian 90 system name. It designates a node other than the
current system for processing the command. name manager designates a
configuration other than the current one.
config file
is the name of a DNS configuration file that was previously created using the
INITIALIZE command.
This form of the command may be issued even when the specified DNS
configuration is in a stopped state.