Distributed Name Service (DNS) Management Operations Manual

RESET ALIASTYPE
The DNSCOM Commands
7–168 31258 Tandem Computers Incorporated
RESET ALIASTYPE The RESET ALIASTYPE command restores default values to the ALIASTYPE
attributes. This command may be used only in definition mode.
RESET [ ALIASTYPE ] [ parameter [ , parameter ] ... ]
ALIASTYPE
may be omitted if the default object is ALIASTYPE.
parameter
is one of the following:
DOMAIN
removes any previous DOMAIN specification.
OWNER
removes any previous owner specification. Subsequent ADD ALIASTYPE
commands must contain an OWNER parameter as this is a required attribute.
SSTYPES [ * ]
indicates that all subsystem-object types previously specified are deleted from
the SSTYPES creation value.
TYPENUM
removes any previous type number specification. Subsequent ADD
ALIASTYPE commands must contain a TYPENUM parameter as this is a
required attribute.
Default values of ALIASTYPE attributes are listed in Table 6-1 in Section 6.
Examples
RESET ALIASTYPE
RESET SSTYPES *