Distributed Name Service (DNS) Management Operations Manual

RESET COMPOSITE
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–169
RESET COMPOSITE The RESET COMPOSITE command restores default values of COMPOSITE attributes.
If no parameters are supplied, all attributes are reset.
RESET [ COMPOSITE ] [ parameter [ , parameter ] ... ]
COMPOSITE
may be omitted if the default object is COMPOSITE.
parameter
is one of the following:
[ COMPONENT ] ssobject type [ IN { subsystem | * } ]
COMPONENT
may be omitted.
ssobject type [ IN { subsystem | * } ]
identifies a component previously specified in a SET COMPOSITE
command.
COMPONENT *
resets all components previously specified.
DOMAIN
indicates that composites subsequently defined through the ADD
COMPOSITE command will have their domain inherited from the type of the
composite being added.
GROUPS [ * ]
indicates that subsequently added composites will not be members of any
group.
TYPE
removes any previous COMPOSITE TYPE specification. Subsequent ADD
COMPOSITE commands must specify TYPE as this is a required attribute.
Default values of COMPOSITE attributes are listed in Table 6-1 in Section 6.
Examples
RESET COMPONENT LU
RESET COMPOSITE GROUPS