Distributed Name Service (DNS) Management Operations Manual

RESET SSOBJECT
The DNSCOM Commands
7–178 31258 Tandem Computers Incorporated
RESET SSOBJECT The RESET SSOBJECT command restores the values of subsystem-object attributes. If
no parameters are supplied, all attributes are reset.
RESET [ SSOBJECT ] [ parameter [ , parameter ] ... ]
SSOBJECT
may be omitted if the current default is SSOBJECT.
parameter
is one of the following:
DOMAIN
indicates that untyped aliases for objects subsequently defined through the
ADD SSOBJECT command will have their domain inherited from their
subsystem-object type.
EXTERNAL
removes any previous EXTERNAL specification.
ALIASES [ * ]
causes all previously specified aliases to be removed.
MANAGER
removes any previous manager specification.
TYPE
resets the subsystem-object type. Subsequent ADD SSOBJECT commands
must specify TYPE, as this is a required attribute.
Default values for DNS attributes are listed in Table 6-1 in Section 6.
Examples
RESET SSOBJECT
RESET ALIASES *
RESET SSOBJECT DOMAIN