Distributed Name Service (DNS) Management Operations Manual

RESET SSTYPE
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–179
RESET SSTYPE The RESET SSTYPE command restores subsystem-object type attributes to their
default values. This command may be used only in definition mode. If no parameters
are supplied, all attributes are reset.
RESET [ SSTYPE ] [ parameter [ , parameter ] ... ]
SSTYPE
may be omitted if the default object is SSTYPE.
parameter
is one of the following:
DOMAIN
removes any previous domain specification.
DUPLICATES
sets the value of DUPLICATES to ALLOWED.
EXTERNAL
sets the value of EXTERNAL to OFF.
FORMAT
sets the value of FORMAT to ANY.
HASMANAGER
sets the value of HASMANAGER to OFF.
SUBSYSTEM
removes any previous SUBSYSTEM specification. Subsequent ADD SSTYPE
commands must specify SUBSYSTEM, as this is a required attribute.
TYPENUM
removes any previous type number specification. Subsequent ADD SSTYPE
commands must specify TYPENUM, as this is a required attribute.
Default values for SSTYPE attributes are listed in Table 6-1 in Section 6.
Examples
RESET HASMANAGER
RESET SSTYPE EXTERNAL