Distributed Name Service (DNS) Management Operations Manual

SET DNS
The DNSCOM Commands
7–200 31258 Tandem Computers Incorporated
SET DNS The SET DNS command establishes creation values for DNS attributes for use in a
subsequent INITIALIZE DNS command. This command is available only in definition
mode.
SET DNS parameter [ , parameter ] ...
DNS
may be omitted if the default object is DNS.
parameter
is one of the following:
ALLOWEXPORTS { ON | OFF }
If ON is chosen, the name exporter is started when the configuration is started.
If OFF is specified, the name exporter is not started, and no name export
occurs.
ALLOWIMPORTS { ON | OFF }
If ON is specified, the name manager accepts imports from remote name
exporters. If OFF is chosen, the name manager rejects import requests, and no
name importing occurs.
DNSOWNER { group number , user-number }
{ group name . user name }
group number and user-number
are integers in the range 0 through 255.
group name and user name
together form the name of a Guardian 90 user on the system defined by
the last CMDSYS command. This does not need to be a user ID that exists
on the local system.
EXPORTDELAY delay
delay
is an integer in the range 0 through 600; the default value is 0. This
parameter specifies the number of seconds that an export task pauses
between TMF transactions.