Distributed Name Service (DNS) Management Operations Manual

SET DNSPROCESS
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–205
SET DNSPROCESS The SET DNSPROCESS command establishes initialization values for DNS process
attributes to be used in a subsequent INITIALIZE DNS command. This command is
available only in definition mode.
SET [ DNSPROCESS ] { DNS-EXPORTER | DNS-MANAGER } parameter
[ , parameter ] ...
DNSPROCESS
may be omitted if the default object is DNSPROCESS.
parameter
is one of the following:
CPUS ( pri-cpu , backup-cpu )
pri-cpu and backup-cpu
are integers with a value in the range of 0 through 15. pri-cpu may not
be equal to backup-cpu .
PRIORITY priority
priority
is an integer in the range of 1 through 199.
PROCESSNAME process name
process name
is a valid Guardian 90 process name in local format.
PROGRAM file name
file name
is the name of an object file to be executed in creating the process.
SWAPVOL volume name
volume name
is the name of the disk volume where the process’s swap files are to be
created.