Distributed Name Service (DNS) Management Operations Manual

SET SSMANAGER
The DNSCOM Commands
31258 Tandem Computers Incorporated 7–211
SET SSMANAGER The SET SSMANAGER command establishes new creation values for managers for
use by subsequent ADD SSMANAGER commands.
SET [ SSMANAGER ] [ LIKE a manager [ at-part ] ]
[ parameter ]
[ , parameter ] ...
where at-part is:
AT { \ system | name manager }
SSMANAGER
may be omitted if the default object is SSMANAGER.
a manager
is the name of or an alias for an existing manager. This causes all SSMANAGER
creation values with the exception of ALIASES to assume the values equal to those
defined for a manager . The ALIASES attribute is reset.
\ system | name manager
indicates a system or name manager where manager is defined. If omitted, the
current name manager is assumed.
\ system is a Guardian 90 system name. It designates a node other than the
current system for processing the command. name manager designates a
configuration other than the current one.
parameter
is one of the following:
ALIASES [ + | - ] { alias-spec }
{ ( alias-spec [ , alias-spec ] ...) }
+
indicates that the listed alias specifications are to be added to those
specified in a previous SET SSMANAGER command.
-
indicates that the listed alias specifications are to be deleted from those
specified in a previous SET SSMANAGER command.
If neither + nor - appears, the listed alias specifications replace those
currently existing for the manager.